Filter
Top Products
5.1 Valid Commands for Hermes DXD
command description
t selects input from first graphical controller
as signal for Digital Out 1
a selects input from second graphical controller
as signal for Digital Out 1
s selects input from first graphical controller
as signal for Digital Out 2
b selects input from second graphical controller
as signal for Digital Out 2
g Restore default settings
h Restore user settings
i Save user settings
j Enable autoswitch
k Disable autoswitch
o Read status register
q Read user settings
v Read product identification
v Read product identification
A assigns an address
I calls for information
Table 5-1