Filter
Top Products
D9112 Operation & Installation Manual
Page 55
© 1993-1996 Radionics74-06144-000-C 2/96
D268/D269 Independent Zone Control
D279 Independent Zone Control
You can program any
on-board
or
OctoPOPIT
point so that the D268/D269 or D279
Independent Zone Control operates as independent point control (arms and disarms the
point).
See the
Point Assignments
in the
D9112 Program Entry Guide
(74-06145-000) for
programming information. See the
D268/D269 Operation and Installation Instructions
(74-04758-000) or the
D279 Operation and Installation Instructions
(74-04993-000) for
wiring and operation instructions.
RIPHERAL DEVICE CONNECTIONS
ED
LLOW
EEN
ACK
32
POWER +
DATA BUS A
DATA BUS B
COMMON
31
30
28
29
Charging And Programming
F.P.A.
yle 0.5
D8132
+12VDC
COMMON
+12VDC
DATA
DATA
COMMON
D9112
Figure 19: Power at Command Centers