Filter
Top Products
D9112 Operation & Installation Manual
Page 63
© 1993-1996 Radionics74-06144-000-C 2/96
Fire Applications (Continued)
Enclosures
Radionics offers three optional enclosures for the D9112.
• The D8103 enclosure is suitable for residential fire and/or burglary installations
and commercial burglary applications that do not require attack resistance or
approval by Factory Mutual or NYC-MEA. (See the
D9112 System Chart
for
acceptable applications.)
• The D8108A is attack resistant. It is intended primarily for UL commercial burglar
alarm and mercantile safe and vault applications requiring a local bell. You can
use the D8108A in any burglar or fire alarm application where the D8103 or D8109
enclosure is suitable. UL lists the D8108A for all commercial fire alarm
applications. The D8108A is approved by Factory Mutual, California State Fire
Marshal, and the New York City Materials and Equipment Acceptance System.
• The D8109 is normally used for commercial fire alarm applications. UL lists the
D8109 for all commercial fire alarm applications. The D8109 is approved by the
California State Fire Marshal, and must be used for NYC-MEA and FM
applications.
Note: All references to NFPA and related requirements are based upon compliance with
the 1993 edition of NFPA 72, National Fire Alarm Code. Since installation specifications
are nearly always based upon a specific edition of a standard which has been legally
adopted by the Authority Having Jurisdiction (AHJ), earlier editions of NFPA standards
will generally apply. Consult with the appropriate AHJ for confirmation.