Filter
Top Products
Drive-Status
Indicator Pattern
(RAID Only)
Condition
Blinks green two
times per second
Identifying drive or preparing for removal
Off Drive ready for insertion or removal
NOTE: The drive status indicator remains off until all hard drives are initialized after the
system is turned on. Drives are not ready for insertion or removal during this time.
Blinks green, amber,
and off
Predicted drive failure
Blinks amber four
times per second
Drive failed
Blinks green slowly Drive rebuilding
Steady green Drive online
Blinks green three
seconds, amber three
seconds, and off six
seconds
Rebuild aborted
PCIe SSD LED Indicators
Figure 4. PCIe SSD LED Indicators
1. activity indicator 2. status indicator
While the operating system is running, the status indicator provides the current status of the device. The following table
lists the device states along with the associated LED indicator codes.
Table 1. PCIe SSD States and LED Indicator Codes
State Name Slot/Device State Status LED (Green) Status LED (Amber)
Device status off The server or device is not
powered up.
Off Off
Device online The device is powered up. On Off
13