Filter
Top Products
1
1-6
PowerPath for UNIX Installation and Administration Guide
Installing PowerPath
Installing PowerPath 4.0
This section describes how to install, or reinstall, PowerPath 4.0 when
no earlier version of PowerPath has been installed on the host.
If you are upgrading to PowerPath 4.0 from PowerPath 3.0.x or 2.1,
refer instead to Upgrading to PowerPath 4.0 on page 1-10.
Mount the CD-ROM 1. Log in as root.
2. Insert the CD-ROM into the CD-ROM drive.
If the CD mounts automatically, continue with Install the Software,
which follows.
If the CD does not mount automatically, you must mount it
manually. Continue with step 3.
3. Mount the CD on your file system. For example, to mount the CD
on
/cdrom/cdrom0, enter:
mount -F hsfs -r /dev/dsk/c
x
t
y
d
z
s0 /cdrom/cdrom0
where
x
,
y
, and
z
are values specific to the host’s CD-ROM drive.
For example:
mount -F hsfs -r /dev/dsk/c0t2d0s0 /cdrom/cdrom0
Install the Software 1. If you do not have a graphics terminal, run the script filename
command to record
pkgadd output in the specified file. (After
pkgadd completes, use CTRL-D to stop recording the output.)
2. Change to the
/
mount_point
/UNIX/SOLARIS directory. For
example, enter:
cd /cdrom/cdrom0/UNIX/SOLARIS
3. Start the installation program. Enter:
/usr/sbin/pkgadd -d .