Filter
Top Products
2
PowerPath in a Sun Cluster 3.0
2-7
PowerPath in a Cluster Environment
Integrating/ Upgrading PowerPath Into an Existing Sun Cluster 3.0
To integrate PowerPath into an existing Sun Cluster 3.0, follow these
steps on each cluster node, one node at a time.
1. Stop cluster services on the node. Enter:
boot -x
2. Install or upgrade PowerPath on the node. Refer to Chapter 1,
Installing PowerPath.
3. Start cluster services on the node. Enter:
reboot
Wait for the node to be fully reintegrated into the cluster before
proceeding to the next node.