Filter
Top Products
1
Installing the PowerPath Volume Manager VCS Agent
1-21
Installing PowerPath
Installing the PowerPath Volume Manager VCS Agent
You can install the VCS Agent at the time you install PowerPath, or
you can install the agent separately. This section describes how to
install the agent separately.
Mount the CD-ROM 1. Log in as root.
2. Insert the CD-ROM into the CD-ROM drive.
If the CD mounts automatically, continue with Install the Software,
which follows.
If the CD does not mount automatically, you must mount it
manually. Continue with step 3.
3. Mount the CD on your file system. For example, to mount the CD
on
/cdrom/cdrom0, enter:
mount -F hsfs -r /dev/dsk/c
x
t
y
d
z
s0 /cdrom/cdrom0
where
x
,
y
, and
z
are values specific to the host’s CD-ROM drive.
For example:
mount -F hsfs -r /dev/dsk/c0t2d0s0 /cdrom/cdrom0
Install the VCS Agent
Software
1. If you do not have a graphics terminal, run the script filename
command to record
pkgadd output in the specified file. (After
pkgadd completes, use CTRL-D to stop recording the output.)
2. Change to the
/
mount_point
/UNIX/SOLARIS directory. For
example, enter:
cd /cdrom/cdrom0/UNIX/SOLARIS
3. Start the installation program. Enter:
/usr/sbin/pkgadd -d .