Filter
Top Products
2
PowerPath in a Sun Cluster 2.2
2-5
PowerPath in a Cluster Environment
Integrating/ Upgrading PowerPath Into an Existing Sun Cluster 2.2
To integrate PowerPath into an existing Sun Cluster 2.2, follow these
steps on each cluster node, one node at a time:
1. Stop cluster services on the node using the
scadmin stopnode
command.
2. Make sure VxVM DMP is disabled.
3. Install or upgrade PowerPath on the node. Refer to Chapter 1,
Installing PowerPath.
4. Start cluster services on the node using the
scadmin startnode
command, and wait for the node to be fully reintegrated into the
cluster.