Filter
Top Products
1
1-14
PowerPath for UNIX Installation and Administration Guide
Installing PowerPath
12. The screen displays information about the installation. Provided
the upgrade is successful (that is, conversion of the configuration
files succeeds) the display ends with:
-----------------------------------------------------------------------
* EMCpower installation:
*
* Installation is successful.
*
* Please REBOOT the host to complete the remaining steps of the installation.
* Refer to the PowerPath for UNIX Installation and Administration Guide for more
* information.
-----------------------------------------------------------------------
The following packages are available:
1 EMCpower EMC PowerPath
(all) 4.0.0_bxxx
2 EMCvg EMC Enterprise Cluster PowerPath Volume
Manager VCS Agent
(sparc) 1.0
Select package(s) you wish to process (or 'all' to
process all packages). (default: all) [?,??,q]:
Important: If the display indicates that conversion of the configuration
files failed, refer to Troubleshooting the Upgrade on page 1-15.
• If you are installing PowerPath for a VCS cluster and you
want to install the PowerPath Volume Manager VCS Agent
now, enter
2 and press ENTER. Continue with Install the VCS
Agent Software, step 5, on page 1-22.
• Otherwise, enter
q and press ENTER.
PowerPath 4.0 is now installed on the host. You must reboot the host
and perform other administrative tasks before PowerPath can run on
the host. Refer to After You Install on page 1-16 for postinstallation
information and procedures.