Filter
Top Products
5
5-16
PowerPath for UNIX Installation and Administration Guide
PowerPath Administration on Solaris
7. Run the sol9_liveup.sh script and then activate the inactive
boot environment:
a. Mount the root of the inactive boot environment to a directory
such as
/mnt.
b. Run the script
sol9_liveup.sh. Enter:
cd /install_dir/EMCpower/scripts
./sol9_liveup.sh /mnt
where install_dir is the base install location of the EMCpower
package. For example, if the base install directory is
opt, enter:
cd /opt/EMCpower/scripts
./sol9_liveup.sh /mnt
c. Continue with the procedure documented in the Solaris 9
Installation Guide.
Troubleshooting
If Solaris Live Upgrade replaces the
sd.conf file with a default sd.conf,
the new boot image may not work. In this case, replace the default
sd.conf with either the file Solaris Live Upgrade automatically
saved in
/kernel/drv/sd.conf.~version or the file you saved before
starting the upgrade procedure. (See step 3, above.)
If you fail to run
sol9_liveup.sh before activating Solaris 9, the new
boot image will not work. In this case:
1. Boot from the older Solaris boot area.
2. Mount the Solaris 9 boot area.
3. Run
sol9_liveup.sh in the Solaris 9 boot area.
4. Boot Solaris 9.