Filter
Top Products
1
Upgrading to PowerPath 4.0
1-11
Installing PowerPath
Upgrading From PowerPath 3.0.x or 2.1
Mount the CD-ROM 1. Log in as root.
2. Insert the CD-ROM into the CD-ROM drive.
If the CD mounts automatically, continue with Install the Software,
which follows.
If the CD does not mount automatically, you must mount it
manually. Continue with step 3.
3. Mount the CD on your file system. For example, to mount the CD
on
/cdrom/cdrom0, enter:
mount -F hsfs -r /dev/dsk/c
x
t
y
d
z
s0 /cdrom/cdrom0
where
x
,
y
, and
z
are values specific to the host’s CD-ROM drive.
For example:
mount -F hsfs -r /dev/dsk/c0t2d0s0 /cdrom/cdrom0
Install the Software 1. If you do not have a graphics terminal, run the script filename
command to record
pkgadd output in the specified file. (After
pkgadd completes, use CTRL-D to stop recording the output.)
2. Change to the
/
mount_point
/UNIX/SOLARIS directory. For
example, enter:
cd /cdrom/cdrom0/UNIX/SOLARIS
3. Start the installation program. Enter:
/usr/sbin/pkgadd -d .
4. You see the following prompt:
The following packages are available:
1 EMCpower EMC PowerPath
(all) 4.0.0_bxxx
2 EMCvg EMC Enterprise Cluster PowerPath Volume
Manager VCS Agent
(sparc) 1.0
Select package(s) you wish to process (or 'all' to
process all packages). (default: all) [?,??,q]:
Enter 1 and press ENTER.