A SERVICE OF

logo

1. INSTALLATION
1-18
3) Apply silicon rubber to M10 bolts as shown below.
2. Connect the TTYCS-4 cable to the DS-600 through the cable glands for the DS-605.
1) Fabricate the cable as shown below.
2) Pass the clamping gland, washer (26-003-1607), gasket (26-003-1605) and washer (sup-
plied as installation materials) onto the cable, in that order.
Apply sellicon rubber.
Apply sellicon rubber.
Seal washer
Seal washer
Nut
Nut
M10 bolt
M10 bolt
Vinyl seath
80 (for TB3)
35
7
Armor
Shield
M3
Vinyl tape
130
TTYCYS-4
Vinyl seath
Fold back and wrap internal shield
and fix it by cable clamp.
x2