Filter
Top Products
3. BERTHING DISPLAY
3-6
3.4 How to Select Vector Time
The tip of the vector line on the own ship marker shows the estimated position of your
ship after the selected vector time elapses, using the current course and speed. You
can adjust the length of the vector line to see estimated position at the end of the pre-
scribed time interval.
1. Press the MENU/ESC key to open the menu.
2. Select [Vector Time] then press the ENT key.
3. Select a vector time then press the ENT key. The longer the time, the longer the
vector line.
4. Press the DISP key to close the menu.