Filter
Top Products
5. OTHER OPERATIONS
5-8
5.6.2 How to set total distance run
The total distance run figure can be adjusted as required.
1. Press the MENU/ESC key to open the menu.
2. Select [Total DIST] then press the ENT key.
3. Select [SET] then press the ENT key.
4. Use S or T to set a value then press the ENT key. (You can move the cursor to
the right with the ENT key. Use the MENU/ESC key to move the cursor to the left.)
5. Repeat step 4 as required.
6. Press the DISP key to close the menu.