Filter
Top Products
3. BERTHING DISPLAY
3-5
3.3.3 How to select the past track format
The past track can be shown with a solid line or solid line and past track markers. See
the illustration on page 3-3.
1. Press the MENU/ESC key to open the menu.
2. Select [Past Tracks] then press the ENT key.
3. Select [ON] or [OFF] then press the ENT key.
[ON]: Past track marker + solid line
[OFF]: Past track marker only
4. Press the DISP key to close the menu.
3.3.4 How to select the predicted track plot interval
Select the interval at which to plot the predicted track as follows:
1. Press the MENU/ESC key to open the menu.
2. Select [Plot Time] then press the ENT key.
3. Select a time then press the ENT key. A new marker is plotted at equally time-
spaced intervals of 1/5 of the plot time selected. For example, if you select the 10-
minute interval, the predicted position is plotted at two-minute intervals.
4. Press the DISP key to close the menu.