Filter
Top Products
1-9
1.3 Monitor
The FR-2115-B/2125-B is available with or without a monitor. This section shows how to mount
the monitor supplied.
Mounting considerations
• The monitor is designed to be mounted on a desktop.
• Locate the monitor where it can be easily operated while viewing the screen and operating the
control unit.
• DO NOT place the monitor on the top of the processor unit.
• Locate the monitor out of direct sunlight and away from heat sources because of heat that can
build up inside the cabinet.
• Locate the equipment away from places subject to water splash and rain.
• Be sure the mounting location is strong enough to support the weight of the unit under the
continued vibration which is normally experienced on the ship. If necessary reinforce the
mounting location.
• The length of the monitor cable which runs between the processor unit and the monitor is 10
m. Keep this distance in mind when selecting the mounting location for the monitor.
• Leave sufficient space on the sides and rear of the unit to facilitate maintenance.