Filter
Top Products
2-1
2. WIRING
2.1 Antenna Unit
Transceiver module
(magnetron inside)
Height more
than 5 cm
Non-ferrous
block
The magnetron in the transceiver module will de-
magnetize if it contacts ferrous material. When
dismounting the transceiver module, lay it on its
side or on top of non-ferrous material as shown
below.
CAUTION
2.1.1 Mounting the antenna chassis
1. Open the antenna unit cover.
2. Disconnect plugs P611, P801 and P821 from the antenna unit.
3. Unfasten two bolts to dismount the transceiver module.
J611
J801
J821
Fixing
bolts
Figure 2-1 Antenna unit, front view