Filter
Top Products
2 GPSMAP
®
4000/5000 Series Owner’s Manual
Getting Started
Getting
Started
Power
connector
Marine video
connector
NMEA 2000
connector
NMEA 0183
connector
Garmin Marine
Network
connectors
Turning the Unit On or Off
To turn the unit on, press and release the Power key. When the Warning screen appears, select
I Agree to open the Home screen.
NOTE: The rst time you turn on your unit, you must go through a setup sequence. See “Initializing
Unit Settings.”
To turn the unit off, press and hold the Power key.
Warning Screen Home Screen
Initializing Unit Settings
The rst time you turn your unit on, you must congure a series of initial settings. These settings
must also be congured when restoring factory settings.
NOTE: You can change these settings later using the Congure screen.
Language—select the language to display on your screen.
Welcome—select OK.
Position Format—specify the coordinate system to use for location readings.
Time Format
—specify whether you want the time shown in a 12-hour, 24-hour, or UTC
(Universal Time Code) format.
Time Zone
—select your time zone.
Units—specify units for on screen measurements as Statute, Metric, or Nautical.