Filter
Top Products
GPSMAP
®
4000/5000 Series Owner’s Manual 21
Where To?
Where
to?
To mark your current location as a waypoint:
From any screen, press the MARK key (GPSMAP 4000 series) or touch Mark on the Home
screen (GPSMAP 5000 series)
Edit Waypoint—designates a specic name, symbol, water depth, water temperature, or
position.
Delete—deletes the waypoint.
Man Overboard—designates the current location as a Man Overboard location.
Next Page/Previous Page—switches between waypoint information and the navigation chart.
Back—saves the waypoint and returns to the navigation chart.
NOTE: Selecting Mark creates a waypoint only at your present location.
To mark an MOB (Man Overboard) location:
When you mark a waypoint, you can designate it as an MOB (Man Overboard). This marks the
point and sets a course back to the marked location. When an MOB is active, an MOB waypoint
with an international MOB symbol is created, and the unit is on an active navigation to that point.
1. At any time, press the MARK key (GPSMAP 4000 series).
2. Select Man Overboard.
On the GPSMAP 5000 series, a Man Overboard button is available on the Home screen.
To edit an existing waypoint:
1. From the Navigation chart, use the map pointer ( ) (GPSMAP 4000 series) or touch the
waypoint (GPSMAP 5000 series) to highlight the waypoint on the navigation chart.
OR
From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
4. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water Temp, or
Position).
To move the waypoint on the navigation chart:
1. Select the waypoint on the navigation chart.
2. Select Review. (The Review button is only shown when more than one waypoint is in the
vicinity.)
3. Select the button for the waypoint you want to edit.
4. Select Edit Waypoint > Position.
5. Select Use Chart or Enter Coordinates.
•
•
•
•
•