Filter
Top Products
GPSMAP
®
4000/5000 Series Owner’s Manual 23
Where To?
Where
to?
5. To add additional turns, select where you want to make the turn (working backward from the
destination) and select Add Turn.
6. Select Done to nish the route or Cancel Route to delete the route.
To create a route in another location:
1. From the Home screen, select Information > User Data > Routes > New Route.
2. Use the map pointer ( ) (GPSMAP 4000 series) or touch the location (GPSMAP 5000 series) to
select the initial location where you want to start the new route.
3. Select Add Turn to mark the starting point of the route.
4. Choose the location of the rst turn and select Add Turn. Repeat until the route is complete.
5. Select Done.
To create a route using Auto Guidance:
1. From the Navigation chart, select your destination.
2. Select Navigate To > Guide To. Your route is calculated.
NOTE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate To > Route To. The auto guidance path stays on the screen, allowing you to trace it while
creating a route.
To edit a route:
1. From the Home screen, select Information > User Data > Routes.
2. Select the route to edit.
3. Select Edit Route. You can edit the route name, edit the route turns, or delete the route.
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select Navigate To > Go To (or Route To).