Filter
Top Products
GPSMAP
®
4000/5000 Series Owner’s Manual 27
Viewing Information
VieWinG
i
nformation
DSC Log—view a list of all DSC calls, sorted by most recent, sender, or by type (distress calls or
position reports).
View By Time
—view the most recent DSC calls received, sorted and displayed chronologically
by time and date. Calls with identical time and date information show the same information in the
list.
View By Sender—view an alphanumerical list of senders.
View By Type—view the most recent distress calls or position reports, sorted chronologically.
Delete All—delete all log entries.
DSC Call List—view the 100 most-recent calls. The DSC Call List shows the most-recent call from
a boat. If a second call is received from the same boat, it replaces the rst call in the Call List.
Directory—view a list of all DSC entries. You can view by name or by MMSI. You can also add an
entry.
Viewing Engine Gauges
To view analog or digital engine gauges from the Home screen, select Information > Gauges >
Engine.
NOTE: You must be connected to a NMEA 2000 network capable of sensing engine data to view the
gauges. See the GPSMAP 4000/5000 Series Installation Instructions for details.
To select analog or digital gauges:
1. While viewing the Gauges screen, press MENU.
2. Select Gauge Setup to select the number of engines (1–4), and the number of fuel tanks (1 or
2), and to reset the odometer to zero.
NOTE: For more than two engines, you can only use the digital gauges. For one or two engines, you
can switch between analog and digital gauges.
Viewing Fuel Gauges
To view fuel gauges from the Home screen, select Information > Gauges > Fuel. Fuel ow for
each engine, total fuel ow, fuel level in each tank, total fuel remaining, fuel economy, and the range
for your boat are shown.
NOTE: To view fuel information, your unit must be connected to an external fuel sensor, such as the
Garmin GFS 10.
•
•
•
•