Filter
Top Products
12. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws
provided.
13. Place the control head back onto the mounting bracket. Plug the assembled cable collector into
the back of the control head, pushing gently but steadily until you feel the collector snap into
place. Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful
not to force the connectors into the wrong sockets. Adjust the control head to the desired viewing
angle and secure by tightening the gimbal knobs.
NOTE: You may wish to dress the cabling with nylon wire ties in order to hold the cables together and create a
cleaner assembly.
The Humminbird® 1100 Series™ control head is now ready for operation.
Cable Collector Insert
1
Screws
2
Cable Collector Cover
3
Assembling the Cable Collector
3
1
2
Plugging the Assembled Cable Connector into the Back of the Control Head
13