Filter
Top Products
■ Antenna installation
DAntenna location
To obtain maximum performance from the transceiver, select
a high-quality antenna and mount it in a good location.A non-
radial antenna should be used when using a magnetic mount.
DAntenna connector
The antenna uses a PL-259 connector.
17
3
INSTALLATION
Roof-mount antenna
(Drill a hole or use a magnetic mount.)
Trunk-mount
antenna
Gutter-mount antenna
•PL-259 CONNECTOR
q Slide the coupling ring
down. Strip the cable
jacket and soft solder.
w Strip the cable as
shown at right. Soft
solder the center con-
ductor.
e Slide the connector
body on and solder it.
r Screw the coupling
ring onto the connec-
tor body.
(10 mm≈
3
⁄8 in)
30 mm
10 mm (soft solder)
10 mm
1–2 mm
solder solder
Soft
solder
Coupling ring