Filter
Top Products
3
2
PANEL DESCRIPTION
q VHF VOLUME CONTROL [VOL]
Adjusts the VHF audio level. (p. 23)
w VHF SQUELCH CONTROL [SQL]
➥Adjusts the VHF squelch level. (p. 23)
➥Depending on the set mode setting, the RF attenuator
is automatically activated when [SQL] is rotated clock-
wise past the 12 o’clock position. (pgs. 23, 66)
e VHF TUNING DIAL [DIAL]
Rotate [DIAL] to set operating frequencies, memory chan-
nels, set mode contents, etc. (p. 20)
r CHANGE/LOCK SWITCH [CHG/L]
➥Toggles the multi-function switch menu. (p. 6)
➥Push [CHG/L] for 2 sec. to toggle the lock function ON
and OFF. (p. 19)
t POWER SWITCH [POWER]
Push for 2 sec. to toggle the transceiver power ON and
OFF. (p. 18)
y UHF TUNING DIAL [DIAL]
Rotate [DIAL] to set operating frequencies, memory chan-
nels, set mode contents, etc. (p. 20)
u UHF SQUELCH CONTROL [SQL]
➥Adjusts the UHF squelch level. (p. 23)
➥Depending on the set mode setting, the RF attenuator
is automatically activated when [SQL] is rotated clock-
wise past the 12 o’clock position. (pgs. 23, 66)
i VIDEO INPUT JACK [VIDEO IN]
Inputs an NTSC or PAL video signal depending on version.
(p. 73)
o UHF VOLUME CONTROL [VOL]
Adjusts the UHF audio level. (p. 23)
!0 MULTI-FUNCTION SWITCHES (pgs. 6, 7)
Push to select the function indicated in the right-hand or
left-hand LCD display of these switches.
•Left-hand switches are used for VHF band and right-hand
switches are used for UHF band.
•Functions vary depending on the operating condition.