66
15
OTHER FUNCTIONS
■ Sub band busy beep
The sub band busy beep sounds when the sub band’s
squelch is closed to inform you that the sub band’s squelch
has been opened.
q Push [
(DISP)SET] for 2 sec. to enter set mode.
•Push [CHG/L] if [(DISP)SET] is not displayed.
w Push [Y] or [Z] to select the ‘Sub Band Beep’ item.
•Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to turn the sub band
busy beep ON or OFF.
r Push [ï] to exit set mode.
q Push [FSET] to enter set mode.
w Push [FSET] or [G ENT] to select the ‘Sub
Band Beep’ item.
e Push [Y] or [Z] to turn the sub band busy beep
ON or OFF.
r Push [ECLR] to exit set mode.
■ Automatic RF attenuator
The attenuator prevents a desired signal from distorting when
very strong signals are near the desired frequency, etc.
The transceiver’s RF attenuator is linked to the [SQL] setting.
The attenuator is automatically activated when [SQL] is ro-
tated clockwise past the 12 o’clock position. Approx. 10 dB at-
tenuation is obtained at full rotation. This function can be
turned ON or OFF in set mode.
q Push [
(DISP)SET] for 2 sec. to enter set mode.
•Push [CHG/L] if [(DISP)SET] is not displayed.
w Push [Y] or [Z] to select the ‘RF Attenuator’ item.
•Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to turn the automatic
RF attenuator ON or OFF.
r Push [ï] to exit set mode.
q Push [FSET] to enter set mode.
w Push [FSET] or [GENT] to select the ‘RF At-
tenuator’ item.
e Push [Y] or [Z] to turn the automatic RF atten-
uator ON or OFF.
r Push [ECLR] to exit set mode.
