Filter
Top Products
20
4
FREQUENCY SETTING
■ Using the tuning dial
q Select VFO mode with the desired band’s [V/M
H
].
•Push [CHG/L] if [V/M
H
] is not displayed.
w Rotate desired band’s [DIAL] to change the frequency.
•The frequency changes according to the selected tuning steps.
See the next page for selecting the tuning step.
D1 MHz tuning step
Push the selected band’s [V/M
H
] to select 1 MHz tuning step.
Push [V/M
H
] again to return to the previous tuning step.
D10 MHz and 1 MHz tuning steps
Push the selected band’s [V/M
H
] once or twice to select 10
MHz or 1 MHz tuning step, respectively.Push [V/M
H
] once or
twice to return to the previous tuning step.
Some versions do not have the 10 MHz tuning step.
■ Using the [Y]/[Z] keys
q Push [BAND] to select the desired band.
w Push [VFO] to select the VFO mode.
e Push [Y] or [Z] to select the desired frequency.
•The frequency changes according to the selected
tuning steps.(p.21)
•Pushing [Y] or [Z] for more than 0.5 sec. activates
a scan. If this happens, push [Y] or [Z] again to
cancel the scan.
1 MHz or 10 MHz steps cannot be used via the [Y]/[Z]
keys.
MAIN
SCP
MAIN
SCP
V/M
H
TS
V/M
H
TS
MAIN
12
14
5.___
MAIN
SCP
MAIN
SCP
V/M
H
TS
V/M
H
TS
MAIN
12
14
_.___
While 1 MHz tuning step is
selected, the digits below
100 kHz disappear.
While 10 MHz tuning step is
selected, the digits below
1 MHz disappear.
Y Z