Filter
Top Products
30
6
REPEATER OPERATION
■ Offset frequency
When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by an amount
determined by the offset frequency.
q Select the mode/channel you wish to set the offset fre-
quency to, such as VFO mode or memory/call channel.
w Push the desired band’s [
(MAIN)EDIT] for 2 sec.to enter the
edit screen.
•Push [CHG/L] if [(MAIN)EDIT] is not displayed.
e Push [Y] or [Z] to select the ‘OW’ item.
•Left-hand tuning dial can also select the item.
r Rotate the right-hand tuning dial to select the desired fre-
quency.
•The offset frequency is set temporarily. Push [MW] for 2 sec. to
store the offset frequency permanently.
•Push [MHz] to toggle the 1 MHz tuning step ON and OFF.
•The color of the frequency indication changes when the setting is
different from the memory or call channel contents.
t If you want to set other channels, push [CH] then rotate the
right-hand tuning dial. Repeat e and r to select the de-
sired frequency.
y Push [ï] to exit the edit screen.
ï
Y
Z
CH
SKIP
MW
MEMORY EDIT
(TS
=
12.5
k)
Name
ICOM
2800
R-Tone
C-Tone
OW
123.0
88.5
0.600
145.320
12
MHz