Filter
Top Products
■ COM port/call sign setting
•Set the com port (RS-232C port) number properly.
•Enter your call sign.
NOTE: ‘Check the following’ dialog box appears when the
RS-232C serial port is not set correctly.
NOTE: When first using this software, read out all the
transceiver cloning data into the PC before starting editing
with this cloning software. Otherwise the cloning data may
not be cloned properly to the transceiver. (e.g. operating
frequency setting, mode selection, etc.)
■
Memory channel list description
q FILE MENU [File]
Used for turning the software on/off, saving memory chan-
nel contents or quitting the program, etc.
w EDIT MENU [Edit]
The memory channel can hold up to 99 channels + 3 pairs
of programmed scan edges + 1 call channel.
Each memory channel can be edited (copy, paste, clear,
insert and delete) via the edit menu.
e VIEW MENU [View]
•UHF memory channel list, VHF memory channel list,
DTMF autodial, Common settings (p. 79) screens are se-
lectable.
•Turn the tool bar or status bar on/off.
r COM PORT MENU [COM Port]
Push to display the COM port setting dialog box.
77
16
CS-2800 CLONING SOFTWARE
qw e
r
t
y
u