Filter
Top Products
39
7
MEMORY/CALL CHANNELS
DProgramming a call channel via the
microphone
The HM-98 microphone can also be used to pro-
gram a call channel.
q Select the desired band with [BAND].
w Select VFO mode with [VFO].
e Set the desired frequency.
•Set other data (e.g. offset frequency, duplex direction, subaudible
tone frequency, etc.), if required.
r Push [FUNC] then [EMW] momentarily to indicate mem-
ory channels.
•Do not hold [MW] for more than 0.5 sec., otherwise the memory
channel will overwrite the selected memory channel.
t Push [Y] or [Z] to select the call channel.
•“C” appears when the call channel is selected.
y Push [FUNC] then [EMW] for 2 sec. to program.
DTransferring call channel contents
The call channels can be transferred in a similar manner to
memory channel transferring.
q Select call channel with the desired band’s [M/C].
•Push [CHG/L] if [M/C] is not displayed.
•“C” appears when the call channel is selected.
w Push [(S.MW)MW] for 2 sec. to transfer.
•Push [CHG/L] if [S.MW] is not displayed.
DTransferring call channel contents via the
microphone
q Select the desired band with [BAND].
w Push [
(MR)CALL] for 2 sec. to select the desired band’s call
channel.
•“C” appears when the call channel is selected.
e Push [FUNC] then [EMW] for 2 sec. to transfer.
MW
A