Filter
Top Products
100
7
VOICE RECORDER FUNCTIONS
7
q Select
S
-
1
.
wPush [F-1
VO
] to call up the voice recorder menu.
•If the receive voice memory channels screen appears,
push [
Z
(
MENU
/
GRP
)] then push [F-2
TX
] to select the
transmit voice memory channel.
•If the voice root menu appears, push [F-2
TX
] to select
the transmit voice memory menu. The voice recorder
starting menu can be changed in the miscellaneous
(others) set mode.
ePush [F-1
T1
] — [F-4
T4
] to transmit the con-
tents.
•“
T1
”– “
T4
” are highlighted while transmitting.
rPush the selected memory channel key, [F-1
T1
]
— [F-4
T4
], again to stop, if desired.
tPush [
Z
(
MENU
/
GRP
)] twice to exit the voice mem-
ory screen.
For your information
When an external keypad is connected to the pin 3
and pin 7 of the [MIC] connecter, the recorded
message, T1–T4, can be transmitted without open-
ing the voice recorder set screen.
See page 137 for details.
[MENU/GRP] [F-2] [F-3] [F-4]
[F-1]
■ Sending a recorded message
q Call up the voice memory recording mode as de-
scribed in steps q to w as above.
wPush [
Y
(
MENU
/
GRP
)] to select the voice memory
transmit level set mode.
ePush the desired memory channel key, [F-1
T1
]–
[F-3
T3
], momentarily to transmit the contents.
rRotate [DIAL] to adjust the transmit voice level.
•Push[F-4
DEF
] to select the default condition.
tPush [
Z
(
MENU
/
GRP
)] to return to the voice recorder
screen.
DTransmit level setting