Filter
Top Products
104
8
MEMORY OPERATION
8
qPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
wSelect the menu
M
-
2
.
ePush [F-4
V/M
] to select memory mode, then se-
lect the desired memory channel with [M-ch].
•Memory channel contents appear instead of the VFO’s
frequency readout.
rSet the desired frequency and operating mode.
•To program a blank channel, push [
Y
(
BAND
)] or
[
Z
(
BAND
)] to select the desired band or use direct fre-
quency entry with the keypad (HM-151).
tPush [F-2
MW
] for 1 sec. to program the displayed
frequency and operating mode into the memory
channel.
[EXAMPLE]:
Programming 21.280 MHz/USB into
ch 18.
Push for
1 sec.
MW
[MENU/GRP]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-2] [F-4]
[Y]
[Z]
DProgramming in memory mode