Filter
Top Products
88
6
FUNCTIONS FOR TRANSMIT
6
■
∂
TX function
The ∂TX function shifts the transmit frequency up to
±9.999 kHz in 1 Hz steps (10 Hz steps when can-
celling the 1 Hz step readout) without moving the re-
ceive frequency.
qPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
wPush [PBT/M-ch/RIT] for 1 sec. to enter the
RIT/∂TX mode.
ePush [F-2
∂TX
] to turn the ∂TX function ON.
•“ ” indicator and the frequency shift appear and
[PBT/M-ch/RIT] indicator lights orange when the func-
tion is ON.
rRotate [RIT] (outer) control to shift the transmitter
frequency.
•The receive frequency is not shifted.
tTo reset the ∂TX frequency, push [F-3
CLR
] for
1 sec.
•Push [F-3
CLR
] momentarily to reset the RIT fre-
quency when “
Quick RIT/∂TX Clear
” in the
miscellaneous (others) set mode is ON. (p. 135)
yTo cancel the ∂TX function, push [F-2
∂TX
] mo-
mentarily again.
•“ ” indicator disappears.
uPush [
Z
(
MENU
/
GRP
)] to exit the RIT/∂TX mode.
When RIT and ∂TX are ON at the same time,
[RIT] (outer) control shifts both the transmit and re-
ceive frequencies from the displayed frequency at
the same time.
Push for 1sec.
Push
Push
Rotate
Appear
Reset to
“0.00k”
[MENU/GRP] [F-2] [F-3]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch
[RIT] (outer)
•Calculate function
The frequency shift of the (RIT or) ∂TX function can
be added/subtracted to the displayed frequency.
While displaying the (RIT and/or) ∂TX shift fre-
quency, push and hold ([F-1
RIT
] or) [F-2
∂TX
] for
1 sec.
•Practical example
When you find a DX station on 21.025 MHz/CW and
the station is picking up stations transmitting slightly
up from 21.025 MHz.
qPush [F-1
RIT
] and [F-2
∂TX
] to turn both the
RIT and ∂TX functions ON.
wRotate [RIT] (outer) to find the DX station’s re-
ceive frequency.
eWhen you find the DX station’s receive frequency,
push [F-1
RIT
] to turn the RIT function OFF.
•Now you can transmit the DX station’s receive fre-
quency and receive the DX station’s transmit fre-
quency (21.025 MHz).
rStart transmitting while the station is standing by.
Push and hold