33
3
BASIC OPERATION
■ Volume setting
Rotate [AF] control clockwise to increase; counter-
clockwise to decrease the audio output level.
• Set a suitable audio level.
DBand edge warning beep
When selecting a frequency that lies outside of a
band’s specified frequency range, a warning beep
sounds.
This function can be turned OFF in set mode, if de-
sired.
qEnter the miscellaneous (others) set mode as
above.
wPush [F-1
≤
] or [F-2
≥
] to select “
Beep (Band
Edge)
,” then rotate [DIAL] to select the desired
setting.
•Push[F-4
DEF
] for 1 sec. to return to default setting.
ePush [
Z
(
MENU
/
GRP
)] twice to return the normal op-
erating mode.
D
Auto tuning step function
When rotating the tuning dial rapidly, the tuning speed
accelerates automatically as selected.
qPush [AF(
SET
)] momentarily to enter the set mode
menu.
wPush [F-4
OTH
] to enter the miscellaneous (oth-
ers) set mode.
ePush [F-1
≤
] or [F-2
≥
] to select “
MAIN DIAL
Auto TS
.”
rRotate [DIAL] to select the desired tuning speed
from high, low and OFF.
•HIGH: Approx. 5 times faster
•LOW : Approx. twice faster
•OFF : Auto tuning step is turned OFF
•Push[F-4
DEF
] for 1 sec. to return to default setting.
tPush [
Z
(
MENU
/
GRP
)] twice to return to the normal
operating mode.
