Filter
Top Products
48
4
RECEIVE AND TRANSMIT
4
2
Count UP Trigger
This selects which of the four memory channels will
have the contest serial number exchange. The count
up trigger increments the serial number automatically
after each complete serial number exchange is sent.
•M1, M2, M3 and M4 can be set. (default: M2)
1
Number Style
This item sets the numbering system used for contest
(serial) numbers— normal or cut numbers.
Normal : Does not use morse cut number
(default)
190➜ANO: Sets 1 as A, 9 as N and 0 as O.
190➜ANT : Sets 1 as A, 9 as N and 0 as T.
90➜ NO : Sets 9 as N and 0 as O.
90➜ NT : Sets 9 as N and 0 as T.
3
Present Number
This item shows the current number in the count up
trigger channel set above.
•Rotate [DIAL] to change the number, or push [F-4
CLR
] for 1sec. to reset the current number to 001.
This menu is used to set the contest (serial) number
and incrementing trigger channel, etc.
•Setting the contact (serial) number
Contact number can be automatically transmitted
from one of the memory keyer channels. The Morse
cut numbers can be used as the contact numbers.
The maximum number for contact numbers is 9999.
qSelect CW mode with [MODE].
wSelect
S
-
1
.
ePush [F-2
KEY
] then [
Z
(
MENU
/
GRP
)] to select the
keyer root menu.
rPush [F-3
001
] to enter the contest number set
menu.
tPush [F-1
≤
] or [F-2
≥
] to select the desired set
item.
•Push [F-4
DEF
] for 1 sec. to select the default condi-
tion or value.
yPush [
Z
(
MENU
/
GRP
)] twice to exit the contest num-
ber set menu and return to normal CW mode indi-
cation.
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
S
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
S
-
1
.
[MODE]
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
DContest number set mode