Filter
Top Products
6
85
FUNCTIONS FOR TRANSMIT
DAdjusting the VOX function
■ VOX function
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function provides an opportunity for
hands-free operation or to input log entries into your
computer, etc., while operating.
qSelect a phone mode (SSB, AM, FM) with [MODE].
wSelect
M
-
3
.
ePush [F-1
VOX
] to toggle the VOX function ON
and OFF.
•“ ”appears while the VOX is in use.
The VOX gain, ANTI-VOX and VOX delay can be set in
VOX set mode.
[MENU/GRP] [F-1]
Appears
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
qSelect a phone mode (SSB, AM, FM).
wSelect
M
-
3
.
ePush [F-1
VOX
] for 1 sec. to enter the VOX set
mode.
rSelect the VOX gain item using [F-1
≤
] or [F-2
≥
].
tWhile speaking into the microphone, rotate [DIAL]
to the point where the transceiver is continuously
transmitting.
yAdjust the VOX delay for a convenient interval be-
fore returning to receive.
-Select the VOX delay item using [F-1
≤
] or [F-2
≥
].
-Rotate [DIAL].
uIf the receive audio from the speaker causes the
VOX circuit to switch to, adjust the anti VOX to the
point where it has no effect.
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
[MENU/GRP] [F-2] [DIAL][F-1]