Filter
Top Products
89
6
FUNCTIONS FOR TRANSMIT
The IC-7000 has a built-in, low distortion speech com-
pressor circuit. This circuit increases your average
talk power in SSB mode and is especially useful for
DX’ing when the receiving station is having difficulty
copying your signal.
qSelect an SSB mode.
wSelect
M
-
3
.
ePush [F-2
COM
] momentarily to turn the speech
compressor function ON and OFF.
•“ ” appears.
[MENU/GRP] [F-2]
Appears
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
■ Speech compressor
■ Monitor function
The monitor function allows you to monitor your trans-
mitted signals at the IF in any mode through the
speaker. The CW side tone functions regardless of
the monitor function setting.
qPush [AF(
SET
)] momentarily to enter the set mode
menu.
wPush [F-4
OTH
] to enter the miscellaneous (oth-
ers) set mode.
ePush [F-1
≤
] several times to select “
Monitor
.”
rRotate [DIAL] to turn the monitor function ON.
•Push [F-4
DEF
] for 1 sec. to return to default condition.
tPush [F-2
≥
] to select “
Monitor Level
.”
yRotate [DIAL] to adjust the monitor level.
•Push[F-4
DEF
] for 1 sec. to return to default level.
uPush [
Z
(
MENU
/
GRP
)] twice to return to normal op-
erating mode.
Use headphones to prevent feedback.
[MENU/GRP] [DIAL]
[AF]
[F-4][F-1] [F-2]