Filter
Top Products
68
4
RECEIVE AND TRANSMIT
4
D
Programming a DTMF code
qPush [MODE] to select FM mode.
wSelect
S
-
1
.
ePush [F-2
DTM
] then [
Z
(
MENU
/
GRP
)] to select the
DTMF root menu.
•If the DTMF root menu appears, skip pushing
[
Z
(
MENU
/
GRP
)]. The DTMF starting menu can be
changed in the miscellaneous (others) set mode. (see
p.136)
rPush [F-2
EDT
] to enter the DTMF edit menu.
tPush [F-1
D1
] — [F-4
D4
] to select the desired
DTMF memory channel.
ySelect the desired code by rotating [DIAL].
•Push[F-1
Å
] or [F-2
Ç
] for cursor movement.
•Push[F-3
DEL
] to delete the selected code.
uRepeat steps t and y until the desired contents
are input.
iPush [
Z
(
MENU
/
GRP
)] to return to memory channel
selection mode, then select the next memory chan-
nel and repeat steps t and u for code input, if de-
sired.
oPush [
Z
(
MENU
/
GRP
)] twice to exit the keyer edit
mode.
DTMF memory channel select
Selected
code
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4] [DIAL]
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
S
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
S
-
1
.
The rate at which DTMF memories send individual
DTMF characters can be set to accommodate oper-
ating needs.
qSelect the DTMF root menu as described above.
wPush [F-4
SET
] to enter the DTMF set mode.
eRotate [DIAL] to set the desired DTMF speed.
•Four rates are available: “100 ms” is the fastest; “500
ms” is slowest.
•Push [F-4
DEF
] for 1 sec. to select the default rate.
rPush [
Z
(
MENU
/
GRP
)] twice to exit the DTMF set
mode and return to the normal FM mode display.
DDTMF speed