Filter
Top Products
61
4
RECEIVE AND TRANSMIT
By monitoring a signal that is being transmitted on a
repeater input frequency, you can determine the tone
frequency necessary to access a repeater.
qDuring tone squelch, DTCS squelch or repeater
operation (“ ,” “ ” or “ ” is dis-
played), select
M
-
3
.
wPush [F-3
TON
] for 1 sec. to enter the FM tone set
mode.
ePush [F-2
SCN
] to toggle the tone scan operation
ON and OFF.
•When a matched tone or code is detected, tone scan
automatically stops, the matched tone or code is dis-
played and the tone or code setting is automatically ad-
justed accordingly.
rPush [
Z
(
MENU
/
GRP
)] to exit the FM tone set mode.
[MENU/GRP] [F-2] [F-3]
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
M
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
M
-
3
.
DTone scan operation
During tone squelch operation. During DTCS squelch operation. During repeater operation.