Filter
Top Products
107
8
MEMORY OPERATION
DMemory names
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 9 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
_
@)
and spaces can be used.
•Editing (programming) memory names
qSelect the menu
M
-
2
.
wPush [F-4
V/M
] to select memory mode.
ePush [F-1] (
MEM
,
LST
) twice to enter the memory
channel list.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
tRotate [M-ch] (inner) control to select the desired
memory channel.
•All memory channels including blank channels can be
selected.
•[
Y
]/[
Z
] on the microphone also changes the channels.
yPush [F-2
NAM
] to edit memory channel name.
•A cursor appears and blinks.
•Memory channel names of blank channels cannot be
edited.
uPush [
Y
(
MENU
/
GRP
)] several times to select the de-
sired character group.
•[ABC], [abc], [123] or [etc] indicates the capital letters,
small letters, numerals or symbols, respectively
iInput the desired character by rotating [DIAL].
•Push[F-1
Å
] or [F-2
Ç
] for cursor movement.
•Push[F-3
DEL
] to delete the selected character.
•Push[F-4
SPC
] to input a space.
•Pushing the HM-151’s keypad, [0]–[9], can also enter
numerals.
oPush [
Z
(
MENU
/
GRP
)] to input and set the name.
•The cursor disappears.
!0Repeat steps t to o to program another memory
channel’s name, if desired.
!1Push [
Z
(
MENU
/
GRP
)] twice to exit the memory
channel list.
Push
Rotate
NAM
Push
Ç
Selected character
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[DIAL][MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from:
M
,
S
or
G
(Graphic)
Menu selection (Example: M)
Push [MENU/GRP] momentarily.
Selection from:
M
-
1
,
M
-
2
or
M
-
3
Either
Y or Z
Either
Y or Z