Filter
Top Products
47
4
RECEIVE AND TRANSMIT
D
Editing a keyer memory
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW se-
quences for often-used CW sentences, contest num-
ber, etc. Total capacity of the memory keyer is 55
characters per memory channel.
• Pre-programmed contents
•Programming contents
qPush [MODE] to select CW mode.
wSelect
S
-
1
.
ePush [F-2
KEY
] then [
Z
(
MENU
/
GRP
)] to select the
keyer root menu.
•If the keyer root menu appears, skip pushing
[
Z
(
MENU
/
GRP
)]. The keyer starting menu can be
changed in the miscellaneous (others) set mode.
rPush [F-2
EDT
] to enter the keyer edit menu.
tPush [F-1
M1
] — [F-4
M4
] to select the desired
keyer memory channel.
yPush [
Y
(
MENU
/
GRP
)] several times to select the de-
sired character group ([ABC], [123] or [etc]).
•Selectable characters (with [DIAL]);
NOTE:
“
^” is used to transmit a following word with no
space such as
AR
. Put “^” before a text string
such as ^AR, and the CW prosign “ ” is sent
with no space.
“
✱” is used to insert the CW contest number.
The contest number automatically increments
by 1. This function is only available for one
memory keyer channel at a time. Memory
keyer channel M2 uses “
✱” by default.
uSelect the desired character by rotating [DIAL] or
by pushing the band key (HM-151) for the incre-
menting trigger memory number input.
•Push[F-1
Å
] or [F-2
Ç
] for cursor movement.
•Push[F-3
DEL
] to delete the selected character.
•Push[F-4
SPC
] to input a space.
•“✱” is for contact numbers and can be input for the
count up trigger channel (“ ” appears).
iRepeat steps y and u until the desired contents
are input.
oPush [
Z
(
MENU
/
GRP
)] to return to memory channel
selection mode, then select the next memory chan-
nel and repeat steps y and i for character input,
if desired.
!0Push [
Z
(
MENU
/
GRP
)] twice to exit the keyer edit
mode.
AR
Key selection
ABC
Editable characters
A to Z (capital leters)
123
0 to 9 (numbers)
etc
/ ?
^
. , @ ✽
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
S
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
S
-
1
.
CH Contents
CQ TEST CQ TEST DE ICOM ICOM TEST
UR 5NN✽ BK
CFM TU
M1
M2
M3
QRZ?
M4
Memory channel select
Selected
character
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]