Filter
Top Products
108
8
MEMORY OPERATION
8
qSelect the menu
M
-
2
.
wPush [F-4
V/M
] to select memory mode.
ePush [F-1] (
MEM
,
LST
) twice to enter the memory
channel list.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
tRotate [M-ch] to select the memory channel to be
cleared (blanked).
yPush [F-3
MCL
] for 1 sec. to clear the contents.
uPush [
Z
(
MENU
/
GRP
)] twice to exit the memory
channel list.
MCL
Push for
1 sec.
Programmed frequency
and operating mode
disappear.
[MENU/GRP]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-1] [F-3] [F-4]
DMemory clearing using the memory channel list
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
qSelect the menu
M
-
2
.
wPush [F-4
V/M
] momentarily to select the memory
mode.
ePush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
•[PBT/M-ch/RIT] indicator (Green) goes out.
rRotate [M-ch] to select the memory channel to be
cleared.
tPush [F-3
MCL
] for 1 sec. to clear the contents.
•The programmed frequency and operating mode dis-
appear and “”appears.
yTo return to VFO mode, push [F-4
V/M
] again.
Push for
1 sec.
MCL
[MENU/GRP] [F-3]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
■ Memory clearing