Filter
Top Products
131
13
SET MODE
7
RF/SQL Control
The [RF/SQL] control can be set as the RF/squelch
control (default), the squelch control only (RF gain is
fixed at maximum) or ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).
See pgs. 1, 35 for details.
RF+SQL
[RF/SQL] control as RF/squelch control
SQL
[RF/SQL] control as squelch control
AUTO
[RF/SQL] control as RF gain control in SSB,
CW and RTTY; squelch control in AM and
FM (default)
■
Miscellaneous (others) set mode (continued)
8
Quick SPLIT
When this item is set to ON, pushing and holding [F-1
SPL
] (
M
-
1
) for 1 sec. sets the undisplayed VFO fre-
quency to the displayed VFO frequency plus the split
offset and activates split operation.
See p. 92 for details.
ON
Quick split ON
(default)
OFF
Quick split OFF
10
SPLIT LOCK
When this item is ON, [DIAL] can be used to adjust
the transmit frequency while pushing [XFC] even
while the lock function is activated.
See p. 91 for split frequency operation details.
ON
Split lock function ON
OFF
Split lock function OFF
(default)
9
SPLIT Offset
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
The offset frequency can be set from –9.999 MHz to
+9.999 MHz in 1 kHz steps.
0.000MHz
0.000 MHz offset
(default)
-9.999MHz
Minus 9.999 MHz offset
12
DUP Offset 50M
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for the 50 MHz band.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
0.500MHz
0.5 MHz offset (default)
11
DUP Offset HF
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for an HF band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
0.100MHz
0.1 MHz offset (default)