Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Requirements
Command Module and Drive Module Site Preparation Guide 1-11
Power Cords and Receptacles
The cabinet is shipped with two power cords: one for domestic (inside USA) use, the other
for international (outside USA) use. Each power cord connects to an independent 25 A
circuit breaker and an AC power distribution box. The AC power distribution box has two
outlets for connecting the power cords from modules installed in the cabinet to an
independent power source outside of the cabinet. Figure 1-6 shows these receptacles.
Figure 1-6 Types of 72-Inch Cabinet Power Cords and Receptacles
From AC Power
Distribution Box
Independent
External
Power Source
250 VAC, 16 A, IEC 320-C19 Cord
250 VAC, 30 A, NEMA L6-30 Cord
(Domestic)
230 VAC, 32 A, IEC 309 Cord
(International)