Filter
Top Products
Command Module Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2 Command Module and Drive Module Site Preparation Guide
Area Requirements
The floor space at the installation site must provide enough strength to support the weight
of the command module and associated equipment, sufficient space to install, operate, and
service the command module, and sufficient ventilation to provide a free flow of air to the
unit.
Weights
The total weight of the command module depends on the number of components installed
Refer to Table 2-1, Table 2-2, and Table 2-3 for more information.
Table 2-1 E4400 Command Module Weight
Maximum
1
Empty Unit
3
Unit Unit Weight
Shipping
2
Weight
Unit Weight
Shipping
2
Weight
Rackmount Command
Module
43.99 kg (97.0 lb) 57.2 kg (125.9 lb) 16.1 kg (35.8 lb) 30.8 kg (67.8 lb)
Battery 9.7 kg (21.4 lb) 11.8 kg (26.0 lb)
Not applicable.
Controller 3.0 kg (6.6 lb) 5.0 kg (11.0 lb)
Controller Fan 0.9 kg (1.9 lb) 2.3 kg (5.0 lb)
Power Supply 1.5 kg (3.3 lb) 2.9 kg (6.5 lb)
Fan Communications
Module
1.84 kg (4.06 lb) 2.46 kg (5.44 lb)
GBIC Minihub 0.567 kg (1.25 lb) 0.712 kg (1.57 lb)
DB-9 Minihub 0.567 kg (1.25 lb) 0.712 kg (1.57 lb)
1
Maximum weight equals a command module with all canisters installed (fully loaded).
2
Shipping weight equals the empty or maximum weight of the command module, plus all shipping materials.
3
Empty weight equals a command module with all canisters removed.