Filter
Top Products
Array Module Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12 Command Module and Drive Module Site Preparation Guide
Interface Cables and Connections
This section provides information about array module interface cables and their
appropriate connections.
The E2400 10x and E2400 14x array modules support Fibre Channel connections to drive
modules. Each module has four GBIC connectors; two on each controller. The connectors
may be fiber optic or copper (Figure 4-6). The connector type depends on what type of
drive interface you order and what type of cable you will be using to attach the array
module to the drive module.
Figure 4-6 Optical and Copper GBICs
Optical
Copper