Filter
Top Products
Array Module Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2 Command Module and Drive Module Site Preparation Guide
Area Requirements
The floor space at the installation site must provide enough strength to support the weight
of the array module and associated equipment, sufficient space to install, operate, and
service the array module, and sufficient ventilation to provide a free flow of air to the unit.
Weights
The total weight of the array module depends on the number of components installed.
Refer to Table 4-1 and Table 4-2 for more information.
Table 4-1 E2400 10x Array Module Weight
Weight
Unit
Maximum Unit
1
Empty Unit
2
Shipping
3
Array Module
Deskside, Low Profile (LP) drives
50.8 kg (112 lb) 23.6 kg (52.0 lb) 59.0 kg (130.1 lb)
Array Module
Deskside, Half Height (HH) drives
54.4 kg (120.0 lb) 23.6 kg (52.0 lb) 62.6 kg (138.1 lb)
Array Module
Rackmount, LP drives
38.9 kg (86.4 lb) 17.8 kg (39.2 lb) 44.1 kg (98.0 lb)
Array Module
Rackmount, HH drives
42.3 kg (94.0 lb) 17.8 kg (39.2 lb) 47.5 kg (105.6 lb)
LP Drive, 18 GB or 36 GB 1.06 kg (2.34 lb)
HH Drive, 36 GB or 73 GB 1.4 kg (3.08 lb)
Controller 2.2 kg (4.8 lb)
Power Supply 2.3 kg (5.0 lb)
Fan 1.0 kg (2.3 lb)
1
Maximum weight equals an array module with all canisters installed (fully loaded).
2
Empty weight equals an array module with all canisters removed.
3
Shipping weight equals the maximum weight of the array module, plus all shipping materials.