Filter
Top Products
Page 104 CPV350
5. Press [ENT], to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to review
and call back, then press [RESEND] to call the selected station.
Figure 19.5.1 - DSC CALL LOG list
19.5.2 To Delete the Received Log from the “DSC Log” Directory
1. Press [CALL]. The “DSC Operation” menu Tabs will appear at the bottom edge of the
display.
2. Press [NEXT] to change the menu Tabs to another Tabs.
3. Press [DSC LOG] to appear “DSC LOG” popup window on the display.
4. Move the ShuttlePoint knob to the up or down or turn the Channel knob to select the
category (DISTRESS or DSC CALL) to be deleted.
5. Press [ENT], to review details for the selected category.
6. Move the ShuttlePoint knob to the up or down to select the station you want to delete,
then press [DELETE] to delete from the DSC Log.
7. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.