Filter
Top Products
Page 124 CPV350
22.4 DSC/RADIO SETUP MODE
The VH-310 Handset can access the DSC / RADIO setup menu (refer to section “19.
DIGITAL SELECTIVE CALLING” and section “20. RADIO SETUP MODE” for details). The
CONTRAST, NAV DISPLAY, KEY BEEP, and AF SELECT menu item accessed from the
VH-310 Handset only controls the VH-310 Handset’s display and speaker.
DSC/RADIO Setup mode from the VH-310 Handset:
1. Press and hold down the [CALL(MENU)] key until “RADIO SETUP” menu appears.
2. Press the []/[] key to select “RADIO SETUP” or “DSC SETUP” menu.
3. Press the [ENT] key, then select the menu item you wish to work on by pressing the []/
[] key.
4. Press the [ENT] key.
5. Press the []/[] key to change the value or condition for the menu item, then press
the [ENT] key to save the new setting.
6. Press the []/[] key to select “EXIT,” then press the [ENT] key to return to the normal
operation.
RADIO SETUP-menu DSC SETUP-menu
NOTE
When the SETUP menu is selected, using the VH-310 Handset, the CPV350 will be temporarily
disabled until the VH-310 Handset exits from the setup mode.