Filter
Top Products
Page 118 CPV350
21.3 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “19. DIGITAL
SELECTIVE CALLING” and section “20. RADIO SETUP MODE” for details). The LAMP,
CONTRAST, and KEY BEEP menu item accessed from the RAM+ only controls the RAM+’s
display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu appears.
2. Press the [UP()] / [DOWN()] key to select “RADIO SETUP” or “DSC SETUP” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work on by pressing
the [UP()] / [DOWN()] key.
4. Press the [CALL/SET] key.
5. Press the [UP()] / [DOWN()] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [UP()] / [DOWN()] key to select “EXIT,” then press the [CALL/SET] key
to return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu
NOTE
When setup menu is selected, the CPV350 will be temporarily disabled until the RAM+ mic, exits
from the setup mode.