Filter
Top Products
Page 26 CPV350
4. MAP FUNCTIONS
4.0 NEW MAX FUNCTIONS MENU
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight MAX FUNCTIONS
and press [ENT] or move the ShuttlePoint knob to the right. The MAX Functions menu
appears on the screen:
Figure 4.0 - Map Functions Menu
The available Functions are described in the following.
4.0.0 Zoom Type
Allows more expansions or compression of the chart scale while zooming in or out. Zoom
Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-ZOOM
mode, a short zoom push causes a change of chart, while a long zoom push causes a pop-
up window to be displayed on a corner of the screen. The window shows the current Zoom
factor. By pressing [ZOOM] and moving the knob up/down the map is expanded or
compressed according to the zoom factor selected. The window is automatically closed if
[ZOOM] is not pressed for 2 seconds and the selected zoom factor will be used at the next
zoom in/out.
To activate this function follow the procedure:
1. Press [MENU] for two times. Move the ShuttlePoint knob to highlight
MAX FUNCTIONS
and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight
ZOOM TYPE and press [ENT] or move the
ShuttlePoint knob to the right.
3. The menu now shows two selections,
STANDARD or FLEXI-ZOOM.
4. Move the ShuttlePoint knob to select the selection and press [ENT].
5. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint
knob to the left a few times.
4.0.1 Fonts & Symbols
On MAX charts it is possible to set the size of all names and symbols drawn on the charts,
selecting between Normal size (the regular characters size) and Large size.
To activate this function follow the procedure:
1. Press [MENU] two times. Move the ShuttlePoint knob to highlight
MAX FUNCTIONS
and press [ENT] or move the ShuttlePoint knob to the right.
2. Move the ShuttlePoint knob to highlight
FONTS & SYMBOLS and press [ENT] or move
the ShuttlePoint knob to the right.